Active Debubbler 5.0 mL Without Degassing Tail

SKU: 9000-1541 Categories: , ,

Description

Our Active Debubbler rapidly removes bubbles from the fluid stream of low pressure systems such as diagnostic instrumentation. Removing system bubbles improves instrument precision and reliability. Unlike passive bubble traps where bubble removal is dependent on backpressure, the Active Debubbler can be installed before or after a pump and provides consistent debubbling regardless of the system conditions. Choose a 2.5 or 5.0 mL volume bubble trap depending on your syringe volume. For debubbling and degassing options see product 9000-1544 or 9000-1545.
IDEX SKU: 9000-1541Our Active Debubbler rapidly removes bubbles from the fluid stream of low pressure systems such as diagnostic instrumentation. Removing system bubbles improves instrument precision and reliability. Unlike passive bubble traps where bubble removal is dependent on backpressure, the Active Debubbler can be installed before or after a pump and provides consistent debubbling regardless of the system conditions. Choose a 2.5 or 5.0 mL volume bubble trap depending on your syringe volume. For debubbling and degassing options see product 9000-1544 or 9000-1545.
IDEX SKU: 9000-1541Our Active Debubbler rapidly removes bubbles from the fluid stream of low pressure systems such as diagnostic instrumentation. Removing system bubbles improves instrument precision and reliability. Unlike passive bubble traps where bubble removal is dependent on backpressure, the Active Debubbler can be installed before or after a pump and provides consistent debubbling regardless of the system conditions. Choose a 2.5 or 5.0 mL volume bubble trap depending on your syringe volume. For debubbling and degassing options see product 9000-1544 or 9000-1545.
IDEX SKU: 9000-1541

Additional information

Bubble Removal

20 cc/min air removed from water at 10 ml /min

Chemical Compatibility

No

Degassing Performance

No

Degassing Transfer Length

No

Expected Lifetime

No

Fluid Compatibility

Not compatible with solutions

Height (in)

5.6

Internal Volume mL

5

Length (in)

0.75

Liquid Connections

No

Max Flow Rate (mL/min)

No

Maximum Temperature ºC

40

Membrane Type

Poridex

Mounting

No

Power Requirements

No

Pressure Rating Max (psi)

No

Recommended Flow Rate (ml/min)

No

Tubing ID (in)

No

Tubing ID (mm)

No

Vacuum Connection

Barb Fitting for 1/8 inch (3mm) ID Elastomeric tubing

Vacuum Flow Path Materials

No

Vacuum Performance

A vacuum source (minimum 16 kPa absolute) suc

Wetted Materials

Poridex, Polyolefine, FEP, ETFE, Ultem(R)

Width (in)

0.5