Active Debubbler 2.5mL Without Degassing Tail
Description
Our Active Debubbler rapidly removes bubbles from the fluid stream of low pressure systems such as diagnostic instrumentation. Removing system bubbles improves instrument precision and reliability. Unlike passive bubble traps where bubble removal is dependent on backpressure, the Active Debubbler can be installed before or after a pump and provides consistent debubbling regardless of the system conditions.
Additional information
| Bubble Removal | 20 cc/min air removed from water at 10 ml /min |
|---|---|
| Chemical Compatibility | No |
| Degassing Performance | No |
| Degassing Transfer Length | No |
| Expected Lifetime | No |
| Fluid Compatibility | Not compatible with solutions |
| Height (in) | 3.6 |
| Internal Volume mL | 2.5 |
| Length (in) | 0.75 |
| Liquid Connections | Inlet: UNF 1/4-28 threaded flat-bottom port Outlet: 1/4-28 |
| Max Flow Rate (mL/min) | No |
| Maximum Temperature ºC | No |
| Membrane Type | Poridex |
| Mounting | No |
| Power Requirements | No |
| Pressure Rating Max (psi) | No |
| Recommended Flow Rate (ml/min) | No |
| Tubing ID (in) | No |
| Tubing ID (mm) | No |
| Vacuum Connection | Barb Fitting for 1/8 inch (3mm) ID Elastomeric tubing |
| Vacuum Flow Path Materials | No |
| Vacuum Performance | No |
| Wetted Materials | Poridex, Polyolefine, FEP, ETFE, Ultem(R) |
| Width (in) | 0.5 |